You want two contrastive knots when hauling up buckets.
When hoisting up a bucket, maybe gone of a inundate hale, it crucial to end a loop that Testament not slip or unravel on all sides of the bucket manipulate. One of the more desirable knots for this is the minatory sounding "noose tie." While it sounds lethal, this tie is whole for the donkeywork at participation, on account of it is a manageable tie to tie and holds the bucket haft securely, still when the bucket is complete of drench. Once the bucket is up or down, you need to wrap off the rope to prevent it from falling down into the well or hole.
Instructions
1. Make a twisted loop at the working end of the rope, making sure the loop goes around the bucket handle.
2. Form a bight of rope around the wrap on the handle.4. Pull the working end of the rope and the main line out from each other to tighten and secure the knot firmly to the bucket handle.5. Hoist the bucket with the knot on the handle.
A bight is a loop in the rope. The bight should go over the handle wrap so the rope looks like a pretzel.3. Push the bight under the handle wrap and pull up and tight.
6. Wrap the end of the hoisting side of the rope around a secure object and tie off with a square knot. Wrap the working end up and around on itself and pull the end through the wrap, securing it to the anchor.
