Running gone of diesel fuel is a grave Migraine.
Unlike Ford Engine Gathering's petrol engines, Ford diesels must get-up-and-go terminated an expanded mode to prime the fuel step after the vehicle runs gone of diesel fuel. You simply cannot fill the receptacle up and coerce off after cranking the engine for a sporadic seconds. With that in imagination, it's capital to avoid running absent of diesel fuel. Anyone with basic automotive repair skill can prime the fuel transaction in a Ford diesel in approximately fifteen minutes.
Instructions
1. Fill the fuel cistern with diesel fuel and diesel fuel lubricity additive. Hoist the hood of the vehivle. Frank the top fuel filter housing with the socket fix. Depending on the model year and engine type, the filter housing may be located in several places; however, you will most likely find it near the oil filter housing, marked accordingly.
2. Pour diesel fuel into the filter housing until the fuel reaches the bottom of the threaded area where the filter cap attaches.
Leave the driver's door open.5. Turn the ignition key to the "Run" position and listen for the fuel pump to begin and stop.
3. Reinstall the filter cap, taking care not to pinch or bind the O-ring.4. Close the hood and climb into the driver's seat.
This should take about ten seconds. Turn the key to the "Off" position when you hear the pump shut off. Repeat this four more times and then start the truck.
