Bondo is marketed an an automotive reason filler.
Vacuum or sweep all dust from the sanded environment. Wash the surface again, whether expedient. Let on to dry. Preparation is crucial to Correct adhesion and performance. Result the instructions carefully.
Instructions
Prepare the Object's Surface Area
1. Disinfected the surface of the thing carefully. Remove dust, sand, widen and debris. Disinfected the surface with roasting, soapy drool to remove oils and dirt. Own to dry.
2. Sand the sphere with 80-grit sandpaper. Sand the globe down to the naked surface; remove emulsion, primer and rust.
3.Bondo is a trademarked intent filler product developed by the 3M corporation. The product is a alloy of microspheres, resins and talc; a chemical reaction between filler and cream hardener causes the information to harden. Bondo is specifically created as an automotive thing filler, nevertheless serves as a durable filler for wood and fiberglass restoration.
Mix the Bondo
4. Wear the gloves, safety goggles and dust mask.
5. Govern the can of Bondo by prying off the plastic lid from the metal can with the screwdriver.
6. Rub the tube of cream hardener thoroughly for diverse minutes. Fix aside.
7. Pour a inconsiderable size of the Bondo filler from the metal can into the plastic lid. Call the wooden emulsion Moving stick to scoop gone the filler and wipe the edges of the can.
8. Open the tube of cream hardener and squirt out a strip of the hardener onto the filler in the plastic lid. 3M recommends a ratio of 2-to-100 by weight. Generally, a golf ball-sized amount of Bondo mixture requires a 3-inch diameter circle of filler and a 3-inch strip of hardener.
9. Mix the filler and hardener quickly with the putty knife. Use the knife to press Bondo into the object area.
Sand and Finish
10. Allow Bondo to cure for 20 to 30 minutes. Sand the Bondo with 80-grit sandpaper; feather edges with 180-grit sandpaper.
11. Allow Bondo to cure for another hour.
12. Prime and paint the Bondo, if necessary.
