The Dodge Dart was produced between 1963 and 1976. Remove the windshield wiper and reinstall it in its resting position if the windshield wiper was knocked out of position by an accident or impediment. Unscrew the retaining nut with your crescent wrench and wiggle the wiper arm back and forth until it comes off the spline. Firmly force it back onto the spline. Lay the wiper arm in the resting position before reinstalling the nut to ensure the wiper is in the correct starting position. As the Dodge Dart is a vintage vehivle, it may be worthwhile to allot compromised windscreen wipers rather than change them. Happily, this is not a taxing chore and can most practicable be accomplished in a unmarried slap.
Instructions
1. Obtain the wiper arm below the bend and above the bend with two sets of pliers. Utilize some energy to transmit the arm to its archetypal shape. Lay the arm in its resting position against the glass windshield and test whether it swipes the blade against the windshield. If it doesn't, try bending the wiper some more.
2. Tighten the retaining nut that holds the wiper to the rotational spline if the windshield wiper is stuck and won't wipe. The nut has to be tight for the spring-action mechanism to move the windshield wiper.
3. In spite of going terminated a scarce rounds of redesigns, the windscreen wipers remained relatively agnate. There are two windscreen wipers on the Dodge Dart, and no rear windscreen wiper. The wipers hold to press the rubber blade firmly against the windscreen in categorization to ease Emigration of debris and obstructions that may block a Chauffeur's illustration of the area.
