Over hour, the components that cause up the V45 Magna motorcycle can grow into worn or damaged, influential them to need replacement. The ignition switch is one of those components that requires fixed charge and consideration. Whether the ignition switch breaks, you Testament be unable open your engine. You can pick up a replacement ignition switch for your bike at your community Car store. With Correct carefulness, the chore can be completed in a sporadic minutes.
Instructions
1. Arena the bike on a Apartment lodgings surface with the kickstand busy. Carefully remove the seat off the bike, and corner it in a guarded sphere for reattachment closest.
2. Remove the counteractive ("-") and fine ("+") terminals off the battery. This will prevent you from gaining any unwanted electrical shocks while carrying out the work.
3. Loosen the mounting bolts, which fix the triangle tree above the handlebars, with a wrench. Remove the three off the steering stem.
4. Run your hand along the ignition cable until you locate the ignition switch electrical connector. Pull the connector out. Reconnect the battery terminals, and turn on the engine to ensure that the engine does now start.
Attach the ignition switch to the tree using the mounting bolts. Follow the removal steps in reverse to fully reassemble the ignition switch and triangle tree.
6. If you are struggling to remove it with your hand, carefully use a slotted screwdriver to pry it out.5. Lift the ignition switch off the triangle tree, and replace it with the new switch.
