Whether your Dodge Durango shudders and vibrates when you hit the brakes, it's probably day to change the rotors. Unscrew the retainers on the wheel studs and then remove the old rotor. If the rotor is stuck in place, use a light duty puller to remove it. Clean the hub and surrounding surfaces with a damp cloth to remove any corrosion or debris.5.
1. Purchase rotors for your Dodge Durango at your regional Car parts store. Modify all of the rotors instantly, or at least convert the front or rear yoke at the identical date for guarded braking performance.
2. Jack up your Durango using jacks and jack stands and block the wheels to prevent them from rolling while you grind. Remove the tire and spin meeting with a socket wrench or an air ratchet.
3. Remove the caliper and mounting bolts and suspend these with mechanic's wire vitality careful not to disconnect the brake line. Never let the caliper hang from the brake line as this could damage the line or cause a disconnection followed by a big mess.
4. Rotors don't commitment to be replaced extremely ofttimes over the existence of your vehicle, nevertheless provided they bend worn down or incline warped then they definitely longing to be swapped away. The system is the identical across all base agedness and you can arrange it in your own garage.
Instructions
Place the new rotor into position on the hub and put the retainers back into place. Replace the caliper and brake line to their original position and then secure the two mounting bolts with a torque wrench.
6. Install the wheel assembly and tire, and then repeat the process for each additional rotor. When you're done, lower the vehicle, tighten the lug nuts with a torque wrench, and then test drive your Dodge Durango to make sure that the brakes are working properly.
