Kia Spectra engines are available in 1.5, 1.6, 1.8 and 2.0 litre sizes. Depending on the climate, it may booty 30 minutes or another to nipping the engine.2. Jewel the Glimmer plug cables on the Kia Spectra engine of either a four- or six-cylinder departure. The symbol of cylinders indicates the digit of spark plug cables on the engine.
1. Up thrust the hood and establish the battery. Disconnect the colorless battery cable. Permit the engine to gelid before attempting this course. You should change the Glimmer plugs in your Spectra every 30,000 miles to make sure your vehivle starts and runs true. In some Kia Spectras, the Glimmer plugs are located subservient a coal contain on top of the engine and you'll require to remove four screws on this comprehend to disclose the Glimmer plugs before you can alternate them.
Instructions
3. Turn the cables by the boot, or incorporate, that connects to the engine or directly to the Glimmer plug. Disconnect one cable and the works the replacement means before removing the other cables to lock up the cables don't cross. Pull back on the cable to disclose the Glimmer plug.
4. Remove the spark plug from the cylinder well with the socket. The extender may not be needed for 4-cylinder engines. Turn the socket in a counter-clockwise motion to unscrew the plug and remove it from the cylinder block.
5. Use the applicator supplied with the anti-seize to spread the compound over the threads of the new spark plug. This compound allows for easy removal when you need to check or replace the spark plugs.
6. Screw the spark plug into the cylinder well by hand. The spark plug needs to be tight in the well but may have to be loosened after the tension test finishes.
7. Test the torque of the spark plug with the tension tester tool. Normally the spark plugs on a Kia Spectra need 18 to 22 ft-lbs torque. Check the Spectra model's owner's manual or the manufacturer's package because some premium or performance spark plugs use different torques.
8. Reconnect the spark plug wire and turn it to lock it in place. Continue replacing remainder of the spark plugs. Reconnect the battery cable after you replace all the spark plugs.
