A Spike gap in your tire doesn't keep to spoil your age.
3. Remove the nail from the tire and discard. Depending on how firmly embedded the nail is, you might be able to do this with your bare hands, but if not a set of pliers will do the trick.
Instructions
1. Engage your motorcar's emergency brake to prevent it from rolling, and then apply a lug wrench to loosen the lug nuts on the circle with the Apartment lodgings tire. Hoist your vehicle using your vehivle jack, duration firm to consult the vehicle's handbook for particular directions and safety precautions.
2. Remove all lug nuts from the trundle meeting and gently pull the shove outside from the vehicle. Contemplate the tire to asset the exact end of the Spike. This might be distinct provided the Spike is great, however a smaller Spike might be difficult to find. If this is the case, apply a little water to the tread of the tire. As air escapes from the tire, bubbles will form at the puncture point. Mark this area with chalk or a piece of tape so that you'll easily be able to locate the hole after the nail has been removed.
Still for the most careful Chauffeur, Apartment lodgings tires are a hazard. Though spying a Spike embedded in one of your automobile's tires can be a deflating empiricism, it doesn't keep to intend hours spent in a waiting space during an expensive stay to an Car repair shop. With the invest in of an inexpensive tire-repair tools, you should be able to return chagrin of most such punctures yourself, in a argument of minutes. Then, take the rasp tool from the tire plug kit, insert in into the nail hole and then remove. This tool acts like a small file that cleans the rubber and roughs up its surface. This will allow for greater adhesion and a better seal with the plug.
4. Cover a plug with the supplied cement and thread it through the insertion tool. Then, push the insertion tool firmly into the tire. Leave about half an inch or so of the plug protruding on the outside of the tire and then pull the insertion tool back out, leaving the plug firmly embedded in the tire.
5. Cut off the protruding end of the plug with scissors or a utility knife so that it sits almost flush with the tire surface surrounding it. The remainder of the exposed plug will wear down quickly when you resume driving. Test the repaired area for leaks by pouring a little water on it and looking for bubbles. If all is well, remount the tire, making sure that all lug nuts are securely tightened and the tire is inflated to the pressure recommended by the manufacturer.
