Gibson exhausts are bolt-on cat-back exhaust systems unreal primarily for trucks. On the contrary, Gibson does compass drawing models for cars, Engine homes, and SUVs. A cat-back exhaust operation is the reduce of exhaust that runs from the catalytic converter to the muffler. The systems available from Gibson are of the bolt-on type, so you'll single admit to distress approximately replacing the exhaust tubing and not the Dainty emissions authority parcel of the exhaust (the converter). Once the geriatric exhaust method is off, install the virgin Gibson exhaust.
Instructions
1. Climb under the vehicle and situate the exhaust on top of 4 jack stands spaced evenly underneath the vehicle. Slide the exhaust piping hangers onto the exhaust hangers on the underside of the vehicle.7. Thread the O2 sensor into the Gibson exhaust. There is only one port for the O2 sensor.
3. Settle an exhaust gasket between the converter and the Gibson exhaust piping. You can place it against the mating surface of the catalytic converter.
4. Press the exhaust piping to the catalytic converter and thread the Gibson exhaust to catalytic converter bolts.
5. Tighten the exhaust bolts.
6. The objective of this procedure is to stab to receive the exhaust off the ground so that you can rank the exhaust tubing with the mounting holes on the catalytic converter.2. Ally the mounting holes on the exhaust with the mounting holes on the catalytic converter.
8. Connect the electrical wiring running to the O2 sensor.
