The alternator on a Mark VIII uses a belt-driven internal generator to dream up electricity for the Lincoln sedan. When you turn the fundamental in your Aim VIII, the battery provides the initial surge of pressure to receive the engine started. Once the engine is running, the alternator takes over and meets the electrical needs of the vehicle until you shut the engine off. The alternator extremely has an outside voltage regulator to direct the aptitude flow within place parameters. Anyone with a solid grasp on the fundamentals of Car repair can transform the alternator on a Aim VIII.
Instructions
1. Lift the Purpose VIII's hood and prop it unlatched. Thread the Mark VIII's alternator mounting bolts in by hand to avoid cross-threading them. Tighten the alternator bolts using a socket set.6. Connect the ground strap and engine harness connector to the Mark VIII's new alternator in reverse of how you removed them.
3. Remove the End VIII's engine harness connector from the back of the alternator by share. Unbolt the alternator trail ground strap from the alternator using a socket place.
4. Extract the Speck VIII's alternator mounting bolts using the socket set. Remove and replace the alternator by hand.
5. Disconnect the balky cable from the battery using a battery wrench.2. Shift the serpentine zone tensioner off the serpentine zone with the serpentine cestuses object. Slide the End VIII's cummerbund off the alternator pulley before allowing the zone tensioner to slowly maneuver back into put.
7. Move the Mark VIII's serpentine belt tensioner aside with the serpentine belt tool. Slide the serpentine belt onto the new alternator pulley with your free hand. Slowly move the belt tensioner back to its normal position before removing the tool.
8. Reconnect the Mark VIII's negative cable to the battery. Close the hood.
