The EGR solenoid is a limited plastic switch that regulates the magnitude of vacuum force sent to the EGR valve. It is usually attached to the engine block with a seed and is hurried to the EGR valve. The solenoid can be located by succeeding the rubber vacuum hose from the EGR valve on the back of the engine block to the solenoid. Replacing the EGR solenoid can be done in good a scarce minutes and you can save chronology doing it yourself.
Instructions
Attach the fashionable EGR solenoid to the engine block with the follower and connect the vacuum hoses and electrical wiring connectors to the solenoid.5. Connect the opposite battery cable to the battery publicize of the vehicle.
3. Loosen the devotee that secures the solenoid to the engine block with a socket wrench and remove the solenoid from the engine compartment.
4.1. Unfasten the absent battery cable from the vehicle battery post with an open-end wrench before attempting to change the EGR solenoid.2. Remove the electrical connector and detach the vacuum hoses from the solenoid.
