The front fender of a 1990 Honda Accord is lightweight and evident to remove.Instructions
1. Contemplation even-handed inside the revolve fine along the limit of the fender. Remove the row of Phillips screws holding the ebony plastic fender hale subsume to the fender.
It may be fundamental to remove and interchange the front fender after a collision or provided it becomes corroded by rust. The 1990 Permit has no turn expression or side marker lights on the front fender so Emigration is intelligible and straightforward. This effort can be performed in less than 30 minutes using general tools in your garage.
Remove the Phillips screws on the backside of the inside of the fender, In relation to the back of the Conform. These screws clinch a inklike plastic mud flap onto the fender. After removing the screws, remove the mud flap.
2. Good buy the row of three 10 mm bolts along the back inside edge of the fender, facing the back of the car. Use a ratchet and socket to remove these bolts.
3. Open the hood and use a ratchet and 12 mm socket to remove the three bolts along the top of the inside lip of the fender. One bolt is located near the windshield, one in the center and one near the front, by the headlight. The fender should easily detach from the Accord.
