98 Cherokee window regulator repair directions.
Jeep doesn't presentation capability windows as a criterion circumstance in the 98 Jeep Cherokee, on the contrary they can be installed upon prayer. These potentiality windows commission when urgent the switches located either on the door panel or the sprint board of the motorcar. The switch is connected to a motor-driven regulator that moves the glass up and down. The transaction of this type of window can be affected by many factors such as damage to switches, wiring or the window Engine itself. Before buying any tool for your window regulator, be certain to analysis all components.
Instructions
1. See the switches on the sprint board and compose firm there are no burned-out filaments. Provided so, convert any blown fuse and essay the window once again. There is probably an subject with the Engine itself whether the Chauffeur's window is the alone one that doesn't job.
2. Turn the skilled terminal bolt of the battery to the left to disconnect it and assign it aside.
3. End a screwdriver to remove the door switches by prying up one side and pulling the switches away of the door panel. Seperate the adapter plug from the switch to disconnect the wiring and settle the switch meeting aside.
4. Account a screwdriver to remove the door panel. Turn the screw in the internal object of the door knob to the left.9. Press the adapter plugs together to replace the switch assembly. Insert the switch assembly into the door panel and press it until fitted. Do no forget to turn the battery's positive terminal bolt clockwise to reconnect it.
6. Withdraw the motor from the window regulator gears by disconnecting it from the wiring harness, separating the adapter plug and then turning the motor mount bolts counterclockwise.
7. Place the spare motor into the window regulator gears. Fasten the mount bolts by turning them clockwise and connect the wiring harness again by pressing the plugs together.
8. Take the door panel and press firmly against the metal door plate to re-engage all of the plastic pins. Fasten the screws of the internal part of the door handle and the arm rest bolts by turning them clockwise.
Then turn the arm rest bolts counterclockwise. Remove hardware and fix it aside.5. Remove the door panel by pulling it along the perimeter of the door until all the plastic pins that hold it in place pop out and are unlocked.
