Installing the glass quarter panel on the door of your Chevrolet S-10 Blazer requires disassembling your Blazer's door. Remove the glass and install a replacement quarter panel onto your S-10.4. Reattach and tighten the bolts to the glass.
1. Sincere the door and pry outside the armrest with a slotted screwdriver. The armrest panel is held in field by a unmarried retaining clip. Remove the clip with a slotted screwdriver and remove the armrest panel from the door.
2. Remove the plastic clips securing the inner panel of the door with a slotted screwdriver. There are several clips all along the edge of the inner panel. Once the clips are removed, you can lift the inner panel from the door. Disconnect the electrical connection before removing the inner panel.
3. Loosen and remove the four corner bolts from the glass with a socket wrench. The glass quarter panel is held in put to the door by a unusual securing bolts inside the door. To install a fresh glass quarter panel, remove the inner door panel and the senile glass. It is a tricky channels, on the contrary it should not select you deeper than an date.
Instructions
Reattach the inner panel to the door and reconnect its electrical connection. Reattach the armrest panel and close the door.
