An exhaust manifold gasket seals the exhaust to the engine block. Typically, the solitary extent you itch to moderate the gasket is when you remark an exhaust leak. After you bear removed the exhaust, you'll committal to be learned the Correct course of action to alter the gasket so that you complete not objective up with a leaking exhaust again. It is bare elementary to cook up a blooper when installing a brand-new gasket.
Thread the manifold to the engine block bolt and tighten them with a socket wrench.
Disinfected the mating surfaces of both the engine block and the manifold using a wire brush. Produce sure that you remove all of the old gasket material. There cannot be any remaining material left on the mating surfaces.
3. Wipe down the mating surfaces with a shop rag.
4. Apply RTV sealant to both the engine block and exhaust manifold mating surfaces.
5. Set the gasket over the exhaust manifold and press it against the RTV sealant once the sealant is gummy. You will have about 30 seconds to 1 minute before the sealant becomes gummy. Then press the exhaust manifold to the engine block.
6.
