GMC S15
Diddly is expanded irritating to deal with on a machine than a broken door use; and in that the Chauffeur's side door gets used the most, its operate is normally the one that breaks beginning. Provided you're collapsing of having to consent your window down so you can gap into your own van, don't consideration. Replacement door handles can be obtained cheaply and booty less than an period to install.
Instructions
Removing a Broken Door Handle
1. Disconnect the ground cable from the contradiction battery terminal. Loosen the follower on the retaining clamp and pull the cable off the terminal.
2. Remove the window hold using a window shaft Emigration part. Use masking or duct tape to hang the plastic sheet over the door frame.20. Reinstall the interior door panel.
Remove the function window switch, whether equipped. Employment a Apartment lodgings blade screwdriver to pry the switch off of the interior door panel. Pry the electrical connecter off the switch.
4. Remove the capability door lock switch, provided equipped. Account a Apartment lodgings blade screwdriver to pry the switch off of the interior door panel. Reinstall the spring clip in the window handle and gently press the handle onto the splined shaft.25. Reconnect the ground cable to the negative battery terminal.
6. Remove all the screws that connect the upholstered door panel to the steel door frame.
7. Carefully slide a thin whitewash scraper or Apartment lodgings blade screwdriver in between the interior door panel and the steel door frame.
8. Slide the screwdriver enclosing the away of the door panel until you hit one of the plastic door panel clips.
9. Pull the door panel straight gone to disengage the plastic retaining clip from the door frame.
10. Go on approximately the away of the door panel until all of the plastic retaining clips are removed.
11. Remove the interior door panel. Once you retain removed all the plastic retaining clips, you can simply lift the interior door panel elsewhere of the idea.
12. Remove the plastic saturate shield. It is normally taped to the door frame and can simply be pulled off.
13. Remove the actuator rod from the inboard side of the exterior door operate. Remove the retaining clip from the actuator rod and pull it forward to disconnect.
14. Remove the two nuts that connect the the outer door apply to the door.
15. Remove the door hold.
Installing a New Handle
16. Stir the door exercise into position and reinstall the two nuts that connect it to the door.
17.Connect the actuator rod to the inboard side of the exterior door arm. Slide the rod into the gap on the door arm and reinsert the retaining clip
18. Temporarily install the window Eccentric person or aptitude window switch. Analysis that the door knob operates properly with the window in both the up and down positions. Analysis that the lock functions properly.
19. Reinstall the moisten shield. Straighten the part with the window handgrip and slide it between the application and the interior panel. The teeth on the part Testament spread the internal reminiscence spring clip and grant you to pull the hold off the splined shaft. Be careful not to lose the spring clip.3.
Make sure the plastic retaining clips align properly with the holes in the door frame. Gently press against the panel to seat the clips in the holes.
21. Reinstall the screws that connect the interior door panel to the door frame.
22. Set the armrest in position and reinstall the screws that secure it to the door frame.
23. Reinstall the power door lock and power window switch if equipped. Reconnect the electrical connectors and push the switches back into the interior door panel.
24. Pry the electrical connecter off the switch.5. Remove the screws that connect the armrest to the door frame. Remove the armrest.
Slide the clamp onto the negative battery post and tighten the retaining screw.
