Doorknob with lock
Kwikset locks are one of the most habitual lock models used on homes in the USA. The Kwikset chart is considered to be one of the easiest locks to install, remove and transform. They are designed so that the criterion homeowner can labour with the lock without having to select a locksmith or known installer. Provided you'd allying to change a Kwikset lock in your national, all you'll devoir is a virgin lock, some basic tools and less than an generation to replete the work.
Instructions
1. Remove the comprehend plates, or roses, from encompassing your doorknob handles. They are typically not fastened, so you Testament simply essential to slide them out from the door using your hands. Whether they are on besides tightly, bid twisting them to loosen them up.
2. Unscrew the two screws that are holding the lock in levy. These Testament typically be on the inside of your homely. You can dispose of these screws once they are removed as your dissimilar lock Testament come with apt fasteners.
5. Remove your lock from the package. Make sure that the side with the keyhole is on the correct side of the door (outside of the home).
If you are replacing the lockset because you lost your keys or are worried about security, make sure you choose a lock with a different key pattern than the one you currently have. Kwikset makes this easy by stamping an ID number on the lock set itself further as on the outside of the packages. Choose a lock with a different number than the one you are holding.
3. Grasp one doorknob in Everyone participation and slowly pull them apart until they are removed from the door.4. Share the lock you removed to your limited national improvement store and invest in a analogous Kwikset design. Slide the two knobs together so that the spindles on one half of the lock connect with the holes on the other half. Push them toward the door until they are flush with the face of the door.
6. Install the two set screws that come with the lock. The location for these screws will be marked on the lock package.
7. Push the cover plates (roses) flush to the door to finish the installation. Not all lock sets will have these plates, so don't worry if yours does not. They are simply for aesthetics.
