The Roadmaster's starter is located on the passenger's side of the vehicle.
4. Remove the two bolts that secure the starter then remove the starter from the vehicle with the crescent wrench. Bolt the current starter onto the vehicle then alternate the wires on their respective terminals. Bolt the cross-member back onto the frame of the vehicle with the 1/2-inch socket.
Instructions
1. Lift the front foot of the vehicle with a tire jack and lower it onto jack stands. Remove the battery cables from the battery terminal by loosening the cable clamps with a crescent wrench.
2. Unbolt and remove the cross-bar on the frame of the vehicle with a 1/2-inch socket. There should be three bolts that secure it to the frame.
3. Fix the starter In relation to the back of the engine on the passenger's side. Exercise electrical tape to deposit all wires attached to Everyone of the terminals cool then remove the bolts securing them to the posts.
The Buick Roadmaster has an awkwardly located starter that requires you fundamental remove the cross-bar on the frame to remove it. Cause trustworthy that your au courant starter has terminal posts that are the duplicate proportions as the decrepit ones; whether they are also diminutive, then you may not be able to fit all of the connecting wires onto the posts. You can make safe that you corner the exact proportions starter, along with saving some chicamin, by bewitching in your full of years starter for a rebuild.
5. Lift the vehicle with the jack, remove the jack stands then lower the vehicle. Alter the battery cables and bow your engine to approval the advanced starter.
