A well-maintained spray booth helps to generate attractive results.
A spray booth is a basic quantity of Accoutrement that is primarily used in protest shops where machine accident repairs share deposit. They serve a multitude of functions that build in the filtration of harmful vapours, running at an optimum temperature during the spraying development and providing a low-bake drying choice that helps to accession workshop turnaround times. Spray booth principle can be improved by prerrogative operator usage and carrying outside detailed perpetuation plans on a popular rationale.
Instructions
Starting Up
1. Before illustration can originate, a spray booth needs to drop for many minutes to fabricate an ambient temperature. Isolator switches must be turned on so that an electrical menu can be established.
2. Dials on the containment panel should be checked before spray booth operations start. Ambient spraying times should be place to encompassing 20 degrees Celsius and the booth should be fix to the "spray" utility.
3. The booth can be turned on using the flourishing push Press-stud if. This Testament activate the burners and filtration transaction and bring the booth up to working temperature. While the booth is warming up, paints can be mixed and added to the spray gun. The full working environment should be Disinfected and clear of tripping hazards before representation begins.
Painting
4. Before entering the spray booth to gloss, the equitable safety Accoutrement must be worn. Anti-static coveralls protect clothing and repel dust while latex gloves location stain outlook into contact with the skin. Most importantly, air-fed respiratory Accoutrement must be worn at all times.
5. Peerless the subject picture a vehicle should be in the spray booth while drudge is in Success. This protects other employees from the perils of harmful vapours and reduces the amount of dust generated by continually opening and closing booth doors.
6. When applying water-based materials, many modern spray booths are fitted with blowers that help the curing process. To activate them, simply exit the spray booth and select the "flash off" option on the control panel once a coat of paint has been applied. The booth will revert back to "spray" mode automatically once the flash off period is complete.
Baking
7. Before baking, allow paint to settle onto a vehicle for approximately 10 minutes.10. Do not re-enter the spray booth for any reason while baking takes place. Most materials will need to be baked for approximately 30 minutes but once again, operators should refer to the technical data sheets supplied with the paint they are using.
This will usually be in the region of 70 degrees Celsius.
9. Turn the oven off and move the switch from the "spray" to the "bake' option. Once the filtration system has halted, press the green button on the control panel to activate the baking process.
This allows solvents to rise from the painted surface and helps to prevent popping during the oven process.8. Ensure all solvents, such as panel wipe and tinned thinners, are removed from the spray booth before baking begins. Check that the baking temperature is set in accordance with technical data sheets relating to the paint products being used.
11. Upon completion, allow the oven to cool for 10 minutes before unmasking the vehicle.
