A screwdriver comes in handy when replacing the MAF sensor.
3. Remove the two screw that attach the MAF sensor to the air inlet tube. Detach the MAF sensor and set it aside.4. This produces improved engine efficiency also as more useful Gauze milage. Place the MAF sensor on the air intake hose that leads to the engine.
Instructions
1. Turn off the car and disconnect the jet negative battery terminal to prevent accidental shock while working.
2. Disconnect the electrical harness that plugs into the the MAF sensor with a firm pull.
The Bulk air flow (MAF) sensor determines the constitution and notebook of air passing concluded the air intake hose primary to the engine. Once it takes a measurement, it sends a expression to the Ford Focus' pc. The machine then accounts for the air merit and notebook reading by adjusting the extent of fuel injected into the van's engine for combustion.
Attach the new MAF sensor to the air inlet tube using the two screws. Plug the wiring harness into the new MAF sensor and then connect the negative battery terminal.
