Representation the hardtop on your Jeep Wrangler is a pleasant expedient to bring some continuance back to an senile, faded top.3. Wipe down the surface of the hardtop with a tack cloth to remove any dust that may be on the surface. This is a good time to examine the top for cracks and other damage so that it can be repaired prior to painting if needed.
Instructions
1. Remove the hardtop from your Jeep and allot on a couple of 2-by-4's to keep it off the ground. Mask off the glass and other areas that you do not want painted using painter's tape and masking paper.
2. Scuff the surface of the top with a high-quality nylon abrasive pad. There are several brands available in the paint department of the auto parts store for you to select from.
The fiberglass facts Testament clout tint hale provided you hire a hasty lifetime to prepare it before spraying any stain on it. Scratches and dings can be constant before you distemper using fiberglass resin and cloth from your regional auto parts store. Dye is available in many colours allowing you to select the one that you obligation for your project. Be definite to end a colossal individuality whitewash for prime results.
4. Spray the hardtop with a thin, even coat of paint. Use a high-quality enamel paint on your top for better adhesion and durability. The higher-quality paints seem to work better and stand up longer on these tops so be selective in your choice.
5. Allow the paint to dry before applying another coat. You will need to do two to three coats to receive good coverage. Continue adding coats until you have achieved the color and coverage you want on the top, allowing the paint to dry between coats. Check the can for exact dry times as they differ from brand to brand.
6. Remove the masking and allow the top to sit and dry after the final coat is applied. Wait 24 to 48 hours after painting to reinstall the hardtop on your Jeep.
