The Chevy Corvette has an electric fuel pump so you should trial its fuses and relays and guard you admit fuel before performing the extended laborious donkeywork of inspecting it. Provided your vehicle yet has dispute getting fuel you may committal To cleanse or convert the fuel pump. The Chevy Corvette comes in a conglomeration of styles and trim levels that can inspire the replacement fuel pump you choose.
Instructions
1. Figure which fuel pump your Chevy Corvette Testament want. This depends not individual on the arrange and design, however as well the engine dimensions. The ahead time Corvette was trumped-up from 1953 to 1962 and was imaginary with 235 cubic inch (ci), 265 ci, 283 ci and 327 ci engines. If your fuel pump is on the left side of the car, you will also remove the float arm. Remove and discard the gasket for the fuel pump.7.
The fourth and fifth date of Corvette was imaginary from 1984 to 2004 and came particular with a 5.7 L engine, on the other hand it was available in many changed types and configurations.
3. Probation the engine size for the current Corvette. The base model has a 6.0 L LS2 engine for 2005 to 2007 models, and base models after 2007 have a 6.2 L LS3 engine.
4. Prepare your vehicle for fuel pump servicing. Relieve the fuel system pressure and drain the fuel tanks. Disconnect the negative battery cable, remove both rear wheels and the fuel tank shield.
5. Mark the fuel lines so that you can identify them during installation and disconnect the quick connect fittings from the fuel sender. Unplug the electrical connection for the fuel sender and remove the fuel tank strap while supporting the fuel tank.
6. Remove the fuel pump bolts with a socket wrench and discard them. You may now remove the fuel pump and retaining clip for the float arm. The moment date Corvette was imaginary from 1963 to 1967 and the replica base had a 327 ci engine with options for 396 ci and 427 ci.2. Stare at engine sizes for sequential generations of the Corvette. The third procreation covers 1968 to 1982 and the design design had a 5.7 L engine with 7.0 L or 7.4 L engine available as options.
Install the new fuel pump using the items included in the kit and be sure to replace the fuel strainer and gasket. Tighten the break away attaching bolts on the new fuel pump until the upper portion shears off. Use a torque wrench to tighten the attaching bolts for the fuel tank strap to 18 foot lbs.
