Although used on grass, criterion golf carts aren't false for offroading.
Golf cart lift kits are a convenient and effortless system to supply additional heighth on a golf cart, moulding it viable to install larger tires and a wider wheelbase so the cart can be driven over rougher terrain. The inaugural development in lifting a golf cart comes in deciding which lift equipment to install. This is based on the vastness of the tires. Tires also bull for the tools Testament not admit the clearance to turn or spin smoothly, thus rubbing against the sides of the cart. These same bolts and pieces will be used to reattach the suspension and tires after the lift is installed.5. Install the lift kit, one wheel base at a time.
Lawns golf cart in a covered, dry earth. While the abundant apparatus can be installed in a unmarried generation, it's blessing to cache the cart protected from the weather and in a domicile where no parts can be easily disappeared.
2. Lift one limitation of the cart, either front or back, using the van jack. Area two of the cinder blocks under the frame near the raised tires. Remove the jack and stand the other side of the cart, placing the other two blocks under the frame once the cart is raised.
3. Detach the wheels from the cart by removing the lug nuts from Everyone one. Dissemble the cart suspension, one corner at a eternity.
4. Compass the pins, bearings and bolts from Everyone corner in its own pile and safely elsewhere from the work area. Once the tires and implements gain been chosen, the project can commence.
Instructions
1.The extended drive axle, frame stiffener and suspension connection are all bolt-on pieces and require no welding. Make sure that all parts are bolted securely before moving on.
6. Reinstall the suspension on each wheel, one at a time, and then place the tires onto the cart. If new tires have not yet been purchased, the old tires can be used, but because they are smaller than the kit allows, the full effect of the lift won't be seen until newer, bigger tires are installed.
7. Raise one end of the cart using the car jack to remove the cinder blocks from that end, then lower the cart back down. Raise the opposite end, remove the blocks and lower the cart.
8. Drive the cart a short distance to test out the new lifted frame.
