Unattended rust can mellow into assorted problems. Blisters and grungy rust stains along with the eventual outright destruction of metal protest parts can and Testament arise unless rust is eliminated. Simply covering it up with a modern coat of stain Testament not prevent these dangerous stuff from contemporary. Happily, there are various products on the bazaar to eliminate rust, and the procedure is effortless to intact.
Instructions
1. Commence removing rust by sanding the area with 120-grit sand paper. On broad Apartment lodgings surfaces, using a sanding block Testament prevent waves from occurring. Alternate sanding and spraying until the surface is built up to be even with remainder of the paint and sanded smooth. Final sanding is done with 600-grit sandpaper.4. Wipe the entire surface to be painted with a cloth soaked in mineral spirits.
Sponge the area clean with mineral spirits and pour a little rust converter into a cup. Using a small brush, apply a liberal coat of rust converter to the bare metal, completely covering the rusted area. Never apply the rust converter directly from the can; doing this can prevent the chemical reaction from occurring and cause incomplete conversion. Allow the product to completely dry. When dry, the converter becomes a stable, sandable primer.
3. Prepare the surface for paint by sanding with 400-grit sandpaper and covering the entire area with a smooth coat of sandable primer. Wait the time indicated on the can for drying, and sand smooth with 400-grit sandpaper. Smaller areas or rounded surfaces can be sanded using a Supple sanding block or by help. Be decided to sand an nature approximately an inch on all sides of larger than the rusted existence To admit for colouring blending.2.
This will remove any oil and sanding dust that might damage the final paint.
5. Spray 2 to 3 light coats of paint to cover the sanded area with a little overlap, and allow to dry. Check the results, and sand any area that has blemishes, like runs or dirt, then spray one final coat of paint.
