When depiciton a motorcar, it is far-reaching to wages earmarked concern to preparing the bumper. You hankering to stain both the bumper and the van thing; nevertheless, the bumper is make-believe of at variance materials than the machine. Confer the development some doctrine and dedicate some period to preparing the bumper for great results.
Instructions
1. Hold the air compressor a few inches above the bumper and spray to ensure dryness. Repeat Step 2 to remove any remaining paint or oil.4. Tackle old bumper sticker residue with rubbing alcohol if it doesn't come off with the solvent.
Wipe a solvent-soaked soft cloth across the car bumper. You must use the solvent, since water will not clean leftover paint and road grime from this type of material.
3. Use an air compressor when drying the bumper. Wash the bumper with soap and dilute. After drying, sand down the bumper to remove distemper residue. Go back to begin any illustration development in a well-ventilated area, as paint and other chemical fumes are hazardous to your health.2.
If the alcohol doesn't work, use a stronger product that removes leftover glue from all car surfaces.
5. Be sure the bumper is thoroughly dry before doing anything else. This drying rule applies to any type of bumper.
6. Apply a coat of plastic adhesion promoter to a clean plastic bumper before painting. Use primer on all bumpers with a light sanding afterwards.
7. Mark any drill holes with a wax marker so the paint will not stick to it, allowing you to easily drill the hole later.
