Apartment lodgings tires happen. If you impel wrapped up a cutting edge interpretation nature and puncture your tire with a Spike or hit a rock on the side of the method, at some aim you Testament demand to alternate a Apartment lodgings tire. Be prepared in advance and gain alter your Apartment lodgings tire so when the inevitable happens, you're ready to receive back on the pathway as soon as likely.
Instructions
1. Deal in a repair equipment with your motorcycle at all times. A average repair apparatus from your bike's manufacturer Testament usually embrace a box cutter or razor blade, spare CO2 cartridge, a tire energy gauge, a valve stem remover, a spare stem and a plug insertion Slogan. Familiarity using this implements on an antiquated tire so when the bit comes you know exactly what to do.
2. Check the tire for the damage. If you find a nail or other piece of debris lodged into the tire, check remainder of the tire before fixing it to ensure that's the only damaged place. If you can't find the exact puncture mark, check the valve stem to see if it's leaking air.
3. Remove the item that punctured the tire carefully. If it's a nail or a rock, pull it out slowly to play down further damage. If it's a screw, use a screwdriver from your repair kit and unscrew it. Pulling out a screw can cause more of the tire to tear giving you a bigger hole to patch.
4. Clean and prepare the puncture site. Use water or a moist towelette to wipe off any dirt on the tire. Attach the plug to the insertion device and slowly push it into the tire. When the plug is in all the way, carefully pull out the insertion device.7. Place water around the edges of the new plug.
Push it into the tire wound to receive the glue on the inside, edges and outside of the tire.
6. Cover the new plug with rubber cement. You want to receive it fully wet, but not so much that the cement is dripping off the plug. Prepare the tire by using a plug insertion device in your repair kit to roughen up the area. This will help adhesive glue stick better.5. Take the rubber cement and put a small amount on the insertion device.
If the water doesn't bubble, that means air isn't escaping and the plug is secure. Refill the tire with your CO2 cartridge and you're ready to receive back on the road.
