Some cars acquire electrical window controls.
Replacement of the Chauffeur's side window on a 2000 Toyota Camry requires the Emigration of the existing window and the installation of the cutting edge one. Access to the window is accomplished by removing the door trim panel. Details of the door trim panel Emigration depend on if the vehicle has manually or electrically actuated windows. You should enjoy the replacement window on ability, before removing the existing window. Virgin or salvaged windows can be used as the replacement.
Instructions
1. Lower the Chauffeur's side window, completely, into the door. Accessible the hood, and remove the battery cables from the battery, using pliers. Remove the rejection cable, followed by the categorical cable. Wait two minutes for the airbag method capacitor to discharge, before working on the door.
2. Remove the window Eccentric person apply on manually operated windows, by sliding a rag under the arm of the crank handle, and using impulse against a clip, at the Eccentric person utilize, to Proceeds the clip. Pull up on the door lock Bump with your plam, to remove it.
Remove the window switch plate on electrically actuated windows, by prying the switch plate with a flathead screwdriver. Disconnect the electrical connectors from the switch plate. Remove a screw inside the panel, using a Phillips intellect screwdriver. Pry off the absent mirror contain, using a flathead screwdriver.
Test the window operation, after reconnecting. Pry, carefully, on all sides of the door trim panel, using a flathead screwdriver, to Proceeds it from its holding clips. Pull up the trim panel; remove any attached electrical connectors, and remove the panel from the door.
4. Lift the window, with one handwriting, far Sufficiently To admit you access to the two window retaining bolts. Custom a socket wrench to remove the window-retaining bolts finished the holes in the door frame. Lift the window Sufficiently to grasp it at the opening, and lift it elsewhere the door.
5. Domicile the replacement window in the door, and reinstall the window-retaining bolts. Reinstall all the parts that were removed, and reconnect the battery cables.3. Prepare the door trim panel for Emigration, by captivating off the plastic discs that incorporate the retaining screws. Remove the retaining screws in the door trim panel and the door arm rest.
