A sagging headliner is a safety hazard that can potentially interfere with safely operating a vehicle. It further cheapens the appearance of the interior of the vehicle. The headliner in a 1998 Saturn SL2 can be replaced as an unabridged unit, rather than removing the essence piece of the headliner and trying to install a contemporary group of material. This negates the itch to immensity a parcel of material and deal with material glue.
Instructions
1. Remove the retaining screws holding the sun visors in compass, using a screwdriver. Remove the visors from the headliner.
2. Dwelling a bantam pry bar between the trim over the window opening and the headliner. Pry the trim elsewhere from the headliner, pulling the metal retaining clips from the mounting holes in the object. Repeat on all sides of the other window openings.
Angle the au courant headliner and cover it wrapped up the passenger's side door.9. Attach the rear of the headliner to the protest. Whether the recent headliner does not encompass velcro, attach a plenty of velcro to the top of the headliner.
Push in the plastic clips on the dome light incorporate to remove it. Detach the retaining screw that holds the encompass in dwelling, using a screwdriver. Detach the electrical connexion and remove the incorporate.
5. Pull the front of the headliner elsewhere from the reason. It is normally held in accommodation by velcro.
6. Pull the rear of the headliner gone from the entity. It is normally held in levy by velcro.
7. Angle the headliner and remove it from the passenger's side front door.
8.3. Remove the screw holding the passenger shaft to the headliner, using a screwdriver. Remove the operate from the headliner.4.
10. Attach the front of the headliner to the oppose. If the new headliner does not include velcro, attach a piece of velcro to the top of the headliner.
11. Attach the electrical connection to the dome light and install the dome light retaining screw with a screwdriver. Push the plastic dome light cover onto the dome light.
12. Place the passenger handle into place and install the retaining screw with a screwdriver.
13. Push the trim over the window opening back to the body to force the metal retaining clips through the mounting holes on the body. Repeat around the other window openings.
14. Position the sun visors on the headliner and install the retaining screw with a screwdriver.
