Interchange a Ford Explorer Window Regulator
The Ford Explorer has window regulators in Everyone door which transfer the kinetic coercion from the window Engine to the window glass by pushing the glass up or down, depending on the course of the Engine. You frank that progression when you push up or down on the window switch. Should the regulator fail, the window glass may seem to come off the track and/or prompt stuck in any of a symbol of positions, normally down.3. Remove the screw located at the end the switch bezel with the Phillips screwdriver. Remove the screws along the backside of the panel and any located remain the arm rest or pull grip on the door panel.
Push the window glass to the top of the window frame. Celebrate it there while you practice the packing tape to the window glass on one side, dash the tape up and over the door frame and back down onto the glass on the other side and stick it to the glass. This Testament prevent the glass from Stirring while you quarters the Ford Explorer's window regulator.
2. Pry the window switch bezel absent of the door panel with the trim stuff. Flip the bezel over and disconnect the wiring harness from the backside of the window and lock switches by handwriting.
Provided that happens, you'll require to interchange the regulator as soon as viable.
Instructions
1. Their locations may vary depending on the year of the Explorer.4. Pry the door panel out from the door with the trim tool. Remove any trim pins holding the panel in place with the trim tool and then grab the panel and lift it up and off the door.
5. Unbolt the window regulator from the window glass tabs, the window motor and the door with the socket set. Pull the regulator out of the door.
6. Insert the new regulator into the door and bolt it to the door, window motor and glass tabs with the socket set.
7. Reinstall the door panel in reverse of how you removed it. Remove the packing tape form the window glass when done.
