Correct exhaust main measurement is primary for motorcycles also as cars.
Measure the exhaust wall thickness at the exhaust pipe tip. Subtract this from the outside diameter measurement to obtain the inside diameter, which is the measurement by which piping is sold. The routing varies, as determine the magnitude of Everyone Element. In context a repair is needed, clever the magnitude of the exhaust tube is the ahead course.
Instructions
1. Locate a straight section of pipe at least 4 inches from any juncture. Do not measure at any bends or where the pipe enters the muffler or catalytic converter.
2. Measure the outside diameter of the pipe. If you are using a caliper or micrometer, place it over the pipe and read the measurement. This is the outside diameter of the pipe. If you are using a tape measure instead, wrap the tape measure around the pipe and divide this measurement by 3.14 to get the outside diameter.
3.A motorcycle's exhaust method has a identical manage ball-buster: to transfer the blistering exhaust gases from the engine to the rear of the bike. On all Environmental Safeguard Agency-certified vehicles, the process is composed of four general components -- the header that mounts to the engine, the catalytic converter that cleans the exhaust gases, a muffler that lessens sound and the piping that connects the pieces. This is where the similarities limitation. Every vehicle's exhaust method is designed differently.
