Consult to your vehicle's maintenace calendar for besides cue on when to change undeniable parts.
5. Locate and turn the retainer 90 degrees. Remove the rubber cover and adjusting nuts. Take out the parking brake cable.
Instructions
1. Elevate your vehicle and base it on a twosome of jack stands. Pursue the directions included with the jack stands for Correct placement under your vehicle. Remove the left rear tire and rotate meeting before starting to job.
2. Disconnect the upper reimburse spring for the parking brake shoes using brake spring pliers. Unlock and disconnect the retaining springs and parking brake shoes by turning the retaining springs 90 degrees.
3. Set the spreader locks and disconnect from the backing plates. To achieve so, gently shake the lower purpose of the spreader lock to remove the holding pin. Pull the connecting cable out of the spreader lock to detach the lock from its housing. Pull the connecting cable through the backing plate.
4. Locate the parking brake cable and trailing arm. Disconnect the parking brake cable. Sit inside the vehicle and remove the console cover. Remove the air grille, nuts, mounting bolt and cap. Locate the bolt on the left hand side of the console and remove the air ducts.
Replacing the plam brake cable, too noted as the parking or emergency brake cable, requires you to first off remove the experienced cable. Removing the artisan brake cable on a BMW E39 540I is consonant to removing the handwriting brake cable on other vehicle models. The E39 540I is constituent of the 5-series, created by BMW in the tardy 1970s. Manufactured between 1995 and 2003, the E39 was replaced by the BMW E34.
