Removing the transmission filter Testament build access to the gears and bands of an automatic easier.
Accessing a vehicle's transmission filter requires removing the transmission pan and draining the transmission fluid. Some vehicles adoption a fluid pan with a bleed valve on the side to filter the fluid. This is easily recognizable from the side of the pan. Removing the filter itself is not time-consuming as it is at the backside of the transmission. This charge should one share an date once the vehicle is raised, and no different tools are required.
Instructions
1. Lawns the automobile on a Apartment lodgings paved surface. Allot the parking brake and chock the back turn.
2. Remove the other bolt while supporting the pan with a free hand. Allow the fluid to drain into the drain pan. Unscrew the other bolt completely. Lower the drain pan from the car.
Set the transmission pan at the backside of the transmission. Community a empty pan under the transmission pan. Unscrew the bleed plug with a crescent wrench whether the vehicle is so equipped. Whether there is no empty plug, then look for the bolts around the drain pan.
4. Unscrew the bolts around the drain pan, except for one bolt on either side of the transmission. Loosen one of these bolts slightly. Situate a jack under the front cross-member and hoist the vehicle colossal Sufficiently to dwelling jack stands under the cross-member. Lower the vehicle onto the jack stands.3.
5. Reach up into the transmission and loosen the bolt holding the transmission filter with a socket wrench. Pull the filter down and out of the transmission. Dispose of the filter along with the transmission fluid.
