Inspecting your strut mounts when completing a repair or replacement on the strut mount step is besides valuable. Set it out of the way. Remove the weather boot on the top of the strut. Inspect it for cracks, excessive corrosion or other disfigurement.3.
1. Remove the strut from the vehicle and secure the coil spring with a general style strut compressor. Once you keep done this, you can procedure on to remainder of the disassembly and inspection of the strut. Educe to helve the spring with consideration, as it has imaginable force stored in it that would be deficient to you.
2. Lift the coil spring with compressor off the strut after removing the upper strut nut. This Testament exposition you any Exorbitant corrosion, cracking or other prepatent problems and authorize you to modify those parts. Bewitching ethical a scarce minutes nowadays can save you hour and funds down the pathway.
Instructions
Notice the condition of the bump stop. Take it off the top of the strut and inspect it carefully. This is your last guard from bottoming your suspension out. It is extremely important for this part to be in good working order. If there is any excessive corrosion or cracking, replace it.
4. Inspect and remove the lower spring rubber. Rubber is generally fragile, as it cracks easy with heat and pressure. Inspect the condition of the rubber and consider replacing it. You are left with the strut flange itself. Inspect the inside, outside, top and bottom for excessive corrosion or cracking.
