Transform an Ignition Lock Cylinder
The ignition lock is normally located on a Engine vehicle's steering edge, dashboard or centre console. When a chief is inserted in the cylinder and turned, the vehicle's engine Testament exit. The ignition-lock cylinder is slotted to clench a solo ignition leading so that another interpretation cannot be used to begin the vehicle. The ignition answer extremely allows some automotive accessories to function all the more though the vehicle may not be running. When the vital is turned to the "embellishment" position, a course becomes active that operates the radio, windscreen wipers, cigarette lighter and so forth. On older vehicles the ignition lock cylinder Testament wear over period from the fixed agility of inserting and removing the decisive and Testament demand to be replaced.
Instructions
1. Pop the hood and remove the cable from the negative battery terminal by turning the clamp nut in a counterclockwise direction with an adjustable wrench. Push the cable aside and away from the battery.
2. Insert the ignition key and turn it to the "accessory" position.
Place the key into the new ignition lock cylinder and insert the assembly into the ignition switch cavity. Turn the key to the accessory position and then back to the "off" position to secure the cylinder into place.7. Place the cable back onto the negative battery terminal and tighten the clamp with an adjustable wrench in a clockwise direction.
Hold the paper clip into the hole while simultaneously turning the ignition key to the "off" position.
5. Pull the lock cylinder out of the ignition switch and discard the paper clip.
6.3. Straighten out a paper clip and stick one end into the hole on the cylinder at the base of the key slot.4.
Close the hood.
