The front shocks on a Jeep Cherokee return on a abundance of answerability in the front suspension.9. Replace the lower nuts to support the new shock to the shock mounting axle bracket and tighten.10.
1. Grassland the Cherokee on a Apartment lodgings paved or concrete surface. Manipulate the parking brake and Proceeds the hood catch.
2. District a rotate chock at the end one of the rear tires.
3. Set and remove the kernel, washer and bushing from the upper shock studs (both sides) in the engine compartment using the ratchet, margin and socket.
4. Elevate the front axle of the Cherokee with the floor jack and abode the jack stand under the axle tube. Repeat for the other side to raise the full front suspension.
5. Deposit on the safety glasses and crawl under one side of the Jeep (on a creeper provided you hold one) and bring the ratchet and sockets with you.
6. Remove the lower nuts on the shock mounting axle bracket using the ratchet and a socket.
7. Remove the geriatric shock.
8. Encompass the new shock (with new lower washer and lower bushing installed on shock stud) into the shock tower being sure to get the upper shock stud through the engine compartment hole.
While the coil springs hand the load of the engine, you can optimize the performance of your manage by replacing the front shocks every 30,000 miles or so. Many character shocks come with a growth warranty and provided you transform them yourself, there Testament be no approaching labour charges.
Instructions
Repeat Steps 6 through 9 on the other shock.
11. Collect all the tools and old shocks and lower the Jeep Cherokee.
12. Place the new bushing, washer and upper shock nut to the shock stud in the engine compartment and tighten on both sides.
13. Close the hood, remove the wheel chock, release the parking brake.
