Repairing the muffler on your Ford Windstar besides usually than not income replacing it.6. Raise the van off of the jack stands with your jack, remove the jack stands from under the van and lower the jack, setting the van on the ground.
1. Up thrust the motorcar with a jack and collar it on a locate of jack stands. Constitute trustworthy to assign the jack stands under the frame or suspension and trial to be firm that the automobile is steady before you slide under it.
2. Place the muffler under the car. Both the inlet and Issue pipes use slip joints and exhaust clamps to attach to remainder of the exhaust system. Remove both clamps with a socket and ratchet.
3. Locate the two rubber insulators/hangers that secure the muffler to the frame. There is one on the inlet pipe and one on the body of the muffler. Slide the isolators off of the mounting rods that are welded to the muffler then slide the muffler off the exhaust pipes.
4. Remove the old muffler from under the van and discard it. Raise the new muffler up to the exhaust pipes and slide it onto them. Slide the rubber isolators onto the mounting rods on the muffler and install two new exhaust clamps at the junction of the muffler inlet and outlet pipes with the existing exhaust pipes.
5. Tighten the nuts on the exhaust clamps with a socket and ratchet. Do not over-tighten the nuts on the clamps, or you will crush the pipe and the system will leak.
Muffler cases tend to be thin; and whether the muffler has damage to it, it is ball-buster to weld or repair in a fashion that Testament deal in it from leaking and activity potentially unsafe. The muffler on the Windstar sits under the passenger compartment and has both the inlet and Issue pipes on the alike extreme of the muffler. The mannequin looks a minor crazy however is needed due to interval limitations under the automobile.