You can remove baffles from a Harley in a meagre easily done steps.
2. Manipulate the electric drill and gap saying to chop ended the baffle--the hollow cylinder in the Centre of the rear of the main. It is welded to a metal plate that holds the baffle in place.
1. Coat the inside of the exhaust cylinder with the cutting oil. The cutting oil Testament ease prevent sparks and metal shards from flying approximately your exhaust step as you are cutting.
Removing the baffles on a Harley is normally done to construct a louder sound for the propel. Many Harley riders credit that louder pipes save lives being a bike that's heard is a bike that's seen. Before removing the baffles, a Harley owner should get that performance Testament Blop off a bit as a corollary; removing the baffles changes the street air moves terminated the engine and exhaust manner.
Instructions
Place the hole saw over the opening and begin cutting. If sparks begin to fly, you may wish to stop and re-coat the muffler with cutting oil.3. Using the needle-nose pliers, remove the baffle. Twist it, turn it and pry it until you can pull the baffle from the center of the muffler. Repeat the same process on the muffler.
4. Start the motorcycle and take it for a test ride. The sound coming from what is now a straight pipe should be deeper and throatier than it was before. Over time, the Harley's performance might wane and you might need to re-tune the engine.
