Repack a Silencer
A silencer is a Slogan that is attached to an exhaust step and used to lessen rumpus. The gain of repacking silencers goes far beyond lessening the buzz that is created by the engine. Regularly repacking your silencer Testament cinch that your Engine consistently gives you maximum capacity. It Testament and extend the appropriate existence of your engine by dotage. Remove the old packing material from the silencer core.4. Separate the muffler core from the silencer housing.
1. Remove the silencer from the dirt bike.
2. Remove the front purpose or inlet cap. Discrepant brands of bikes accept contrary types of inlet caps. Some caps are secured by screws and others bear rivets that Testament annex to be drilled gone. If there is rust on your cap, you might have to tap it a few times with a rubber mallet in order to remove it.
3. Silencers on dirt bikes should be repacked every couple of age. Silencers are not unlike mufflers.
Instructions
Clean the inside of the housing with a paper towel.
5. Clean the muffler core with a wire brush.
6. Slide the repacking kit over the muffler core and then remove the paper tube.
7. Slide the silencer core with the new packing material back into the silencer housing.
8. Push the inlet cap back onto the silencer, secure it, and then mount it to your bike.
