Changing a lever may be basic when replacing a broken lever or when adding a bit of style to your coerce.
Motorcycle clutch levers come in a incongruity of styles and configurations. Changing a lever may be expedient when replacing a broken lever or when adding a bit of style to your drive. Whatever the brains, the action is quite straight forward and the skill comparable is rather clear. Arrange that you posses all required tools collected before dawn the charge. The length of bout needed to nickels a clutch lever on a motorcycle Testament be all over 45 minutes to an interval.
Instructions
Remove the Old Lever
6. Install the end of the clutch cable and the anchor pin into the new clutch lever.7. Place the lever into position in the handlebar mount and slide the pivot pin into place. Reinstall the retaining ring with snap ring pliers.
Loosen the clutch adjuster devotee with an open-end wrench to supply maximum slack in the cable.
3. Remove the hand-lever axis pin-retaining ring with snap ring pliers. Pull out the pivot pin.
4. Take out the clutch-lever anchor pin. Remove the clutch cable end from the lever.
5. Pull the lever from the handlebar assembly.
Install the New Lever
1. Slip the protective boot that covers the clutch cable and adjusting fan up the cable, absent from the adaption hardware.2.
8. Tighten the clutch cable-adjusting nut, so that there is 1/16 to 1/8 of an inch of free play at the hand lever.
9. Slide the boot cover back over the adjusting nut on the clutch cable.
