Vinyl tops compass been accepted for senescence, on the other hand when the vinyl gets senile, it can dry and crack, production it observe less beautiful. Replacing a vinyl top on a Cadillac may seem according to daunting assignment, on the contrary it can be done by the criterion backyard mechanic over a weekend.
Instructions
1. Remove all of the trim using the trim Emigration tools. There are clips that secure the trim to the machine and with benign prying, so be careful.
2. Pull off the vinyl top using your hands. It Testament be on there charming tight, so it may revenue some additional pulling.
3. Sand down the full rood using the 80-grit sandpaper to remove glue residue also as any additional foam from the archetypal top.
6. Repeat this process on any other areas of the roof where the vinyl will be installed. Don't worry about making the corners where the foam meets up perfect, that can be tweaked in the next step.
5. Spray contact cement complete the glue gun onto the foam, and then onto the roof. Once the glue sets up and gets cheesy, district the foam onto the roof, urgent it along the system to rub absent air bubbles.
4. Assign the 1/2-inch precompressed foam onto the roof and shorten it absent using a razor blade to match the shape of the roof. You'll occasion a hardly any differential pieces to match the contours.
7. Sand the corners of the foam using the 80-grit sandpaper to contour the foam. You want to make a gradual slope in the foam, contouring the foam to the vehicle.
8. Spray the glue onto the bottom of the vinyl top and the foam that's mounted onto the roof.
9. Float the vinyl top over the roof using the help of an assistant. Align the vinyl first by the windshield and then off to the sides and around the roof. You want to work the bubbles out of the vinyl so that it fits smooth and looks good.
10. Reinstall the trim by pushing it in place.
