Gelcoat protects the surface of your boat and gives it a divine, shiny Stop
Gelcoat is the resin Stop applied over any fiberglass constitution to ante up it a protective coating. For a boat, this Stop protects the hull from leakage by covering the porous fiberglass and creating a capable glossy shield. Whenever any existence of the gelcoat of a boat is damaged either by scuffing or nicks and gouges, it should be repaired to prevent damage to the hull and to direct saturate from leaking into the boat's interior. These should be removed with fine sandpaper between each coat.4. Apply several layers of gelcoat for a thick, firm surface.5.
Disinfected the globe to be painted or repaired completely. Remove any dated coating with acetone.
2. Employment a complete brush loaded with gelcoat. Using besides thin an application will cause the brush to leave bristle marks along the surface.
3. Use fine grain sandpaper to smooth the surface after each application. No matter how much gelcoat you use on the brush, you are going To possess some brush marks. The champion fashion for applying gelcoat is with a spray applicator, on the other hand provided none is available, it is credible to brush on the gelcoat.
Instructions
1.Allow each coat to dry completely before the next one is applied. Brushed-on gelcoat does not dry as well as sprayed on applications and can be more brittle when finished.
