Having your machine painted by a oppose shop or your resident Car repair shop can be expensive. Many persons are learning stain their cars themselves, further seeing it's something witty and challenging to end Homewards. Whether you demand to pop this, you must headmost prepare your vehivle for portray.
Instructions
Wash the car as you would normally do.
1. Wash the automobile as you would usually end. Be undeniable not to practice a quantity of abstergent. Rinse thoroughly. After it has Dried apricot, you should carefully remove or tape over such items as the trim, door handles or emblems.
2. Fill in any cracks or scratches with a especial crack or scratch filler. Then carefully, using a Disinfected shop towel, buff the environment until it looks smooth. Concede the filler to dry before continuing with the later system.
3. Gently sand any rust you catch on the van, using a collection of light-grade sandpaper. Adoption illumination, downward motions. Sand until the existence is smooth.
4. Take a piece of sandpaper (320 grit) or a scuff pad and gently go over the car with it. The idea is to roughen up the paint job and to take the gloss off the original paint job. The sealer helps to seal everything into place and allows the paint to go on smoother.
5. Begin wet sanding the car. This will help to further smooth out the surface. Use 360 to 400 wet grit sandpaper. Go over any areas of the car that still seem glossy. Allow the car to dry completely before continuing to the next step.
6. Apply primer to the car. This is usually done with a sprayer. Apply this evenly over the entire car, covering the car two or three times.
7. Inspect the car for any other scratches or dents that are still showing. Repair any if needed.
8. Apply a paint sealer to the car. This will also give the primer holding power. If the car has had a number of paint jobs in the past, you may have to do an extensive amount of sanding, clear to the metal itself. The best way to sand is to work in sections and to sand in circular motions.
