Removing the starter from your Ford F250 may be vital whether the starter has failed or is not functioning as it should. Find the cover that protects the two terminals on the rear of the solenoid, grasp it and pull it straight off the terminals.4. Remove the retaining nuts on the two terminals with a socket and ratchet, then slide the wires off the terminals and push them off to one side. Locate the ground eyelet and wire on the bottommost mounting stud of the starter.5.
Instructions
1. Fix the annulling battery cable on the battery terminal. Loosen the retaining bolt on the cable aim with a wrench, lift the cable off the terminal and establish it aside.
2. Position a jack under the front of the Motor lorry and hoist it off the ground. Position a place of jack stands under the front suspension to aid the Motor lorry.
3. Slide under the passenger's side of the Motor lorry and fix the starter Engine at the rear of the engine, where it meets the transmission bell housing. Either the starter or the solenoid could be at wrongdoing. Once you chalk up the meeting elsewhere of the Motor lorry, catch it to an auto-parts store for testing. Most Testament bench-test it complimentary and reccomend a modern starter or another effects to solve the count. Removing the starter in the driveway or garage yourself can save you a important repair value and is a bulky assignment for the residence mechanic.
Remove the ground retaining nut with a socket and ratchet, then slide the ground wire and eyelet off the stud. Remove the second nut from the stud and set it aside.
6. Move up the starter and find the two upper mounting bolts. Remove both bolts with a socket and ratchet and slide the starter out of the bell housing.
7. Carefully lower the starter out of the engine compartment. It is heavy, so do not lie under it as you pull it free from the engine and bell housing. Remove the starter assembly from under the truck.
