Replacing the alternator on the Dodge Neon is not formidable when you annex the Correct tools to business with.
Loosen the lower bolt on the alternator using a socket and ratchet however determine not remove it. Lift the region from the alternator pulley. Push in the bloodshot locking tab to Proceeds the wiring harness from the alternator.3. Whether the alternator is deficient, the battery Testament extract identical quickly and consent the Neon sitting when the potentiality is absent.
Instructions
1. Free the hood of your 2004 Dodge Neon, interest it secure with the prop rod. Cinch the engine is arctic before working under the hood to prevent the opportunity of activity burned. Disconnect the con cable from the battery using a wrench to loosen the terminal stone. Loosen the stone on the alternator using a socket and ratchet on the contrary conclude not remove it. Loosen the adjusting bolt on the alternator using the socket and ratchet however conclude not remove it.
2. Remove the splash shield from the accessories using a wrench whether there is one installed on the Neon.The alternator on the 2004 Dodge Neon is directly duty-bound for the age of the electricity required by the car's components. The conception that the vehivle operates from the battery, as most crowd commonly presume, is sole partially correctly. The battery powers these components when the van is not running, on the contrary once you derivation the engine, the alternator takes over.
Disconnect the leading electrical first place from the alternator using a wrench to loosen the nut. Remove the upper and lower bolts from the alternator. Remove the pivot bracket using a socket and ratchet to remove the bolts. Remove the alternator from the Neon.
4. Install the new alternator on the Neon. Install the pivot bracket and tighten the bolts with the socket and ratchet. Loosely install the upper and lower alternator bolts. Connect the main electrical wire to the alternator and tighten the nut with a wrench. Plug the wiring harness into the alternator and push it in until it locks into place.
5. Place the serpentine belt on the alternator pulley. Tighten the lower alternator bolt with a socket and ratchet. Tighten the adjusting bolts on the alternator until the belt is at the proper tension. You have the proper belt tension when you are able to depress the belt about ½ of an inch on the longest span with your finger.
6. Tighten the top alternator bolt using the socket and ratchet. Install the accessory splash shield and tighten the fasteners with a wrench if the Neon has one. Connect the negative battery cable. Tighten the terminal nut with a wrench.
