The 2002 Kia Spectra comes equipped with two disparate belts that government all of the accessories on the front of the engine. One of the belts controls the air conditioner pump and faculty steering pump. The other girdle controls the alternator and the radiator fan. Both belts are driven across Everyone finery pulley by the crankshaft pulley. Everyone zone is designed to globetrotting environing the pulleys on Everyone finery to enable the accessories to operate. These belts Testament compulsion to be replaced provided they shift damaged in any idea. Provided not, the belts could gap.
Instructions
1. Stadium the 2002 Kia Spectra in a guarded working globe and airy the hood.
2. Place the fan zone on the front of the engine. The fan girth further controls the alternator on the front passenger side of the engine. The alternator has an accustoming bracket on top that tightens and loosens the fan cestuses.
3. Loosen the spindle bolt on the backside of the alternator with the 1/2-inch operate ratchet and a socket. The axis bolt is located directly underneath the alternator.
4. Loosen the locking follower that is on the front of the adjustment bracket with the 1/2-inch manage ratchet and a socket.
5. Then, turn the motor off and shut the hood.
6. Route the new fan belt around the fan blades and onto the crankshaft pulley first. Then, put the belt around the fan pulley and the alternator pulley.
7. Turn the adjustment bolt on the end of the bracket clockwise with the ratchet and socket until the belt is tight. To test the tension of the belt, push downward on the belt with your hand. You should have no more than one-half inch of slack in the belt.
8. Tighten the locking nut down tight on the front of the adjustment bracket with the ratchet and socket.
9. Tighten the pivot bolt on the bottom of the alternator down tight with the ratchet and socket.
10. Crank the 2002 Kia Spectra and inspect the new fan belt with the motor running. Make sure that the new belt stays seated in the pulleys. Turn the reconciliation bolt on the butt end of the reconciliation bracket counterclockwise to loosen the fan region. Then, pull the fan belt off the alternator pulley, fan pulley and the crankshaft pulley. Then, route the belt out around the fan blade and out of the engine compartment.
