Electric Trailer Brakes
Bolt the backing plate to the trailer axle. Indication that the method of rotation is critical. Be positive the backing plates are mounted on the Correct sides of the trailer.4. Connect the magnets to a wire and jog them to the Language of the trailer. Most brake manufacturers reccomend that you custom a seperate ground wire and not applicability the trailer frame e for a ground. I operate the trailer frame for a ground on my trailer nevertheless and it works just fine for me.
2. Remove the existing trailer hub.
3.Adding electric trailer brakes Testament cure cause your trailer safer. A choice investment of your date and chicamin.
Instructions
1. Access a electric trailer brake instruments. A commendable utensils Testament include the backing plate with all the goods assembled. You Testament as well charge a matching brake drum to match you trailer spindles and the backing plate.5. Make a connection To admit the trailer brakes to be connected to the trailer brake controller. The standard wire color is blue. Many trucks will already have a blue wire run in the wiring harness for you. I found on in my Suburban and attached the controller output to it under the hood and extended it to arrive the trailer connector in the back.
6. Install the brake drum and set the spindle nut the the specified torque. Be sure to grease the new bearings with the proper grease. The hub with brakes will run much hotter than your old hubs did so use high temp grease.
7. Test the system by pressing the emergency button on the brake controller. The trailer brakes should activate immediately. If it all works OK, follow the trailer brake controller adjustment procedure to set the correct power and delay for your trailer and loads.
8. Enjoy your new stopping capacity.
