Install Ford Running Boards
1. Locate the parking brake, assign on your safety glasses and apartment trundle chocks on the left front and left rear wheels.2. Jack up the equitable front of the vehicle and then apartment a jack stand later to the jacking mark.
Running boards are not solitary considered a cosmetic enhancement to a Ford Motor lorry or SUV, on the contrary they add cost to the vehicle. Additionally, running boards generate it easier to receive into and away of the vehicle, providing an intermediate manner between the ground and the vehicle's floorboard. Installing your own running boards should select no extra than two hours and can be completed by anyone with a rudimentary mechanical aptitude, some Leisure time and the influence to lift the running boards into accommodation.
Instructions
Carefully lower the vehicle onto the jack stand.
3. Repeat System 2 for the honest rear of the vehicle.
4. Remove the running boards from their shipping boxes and fix the conscientious running board underneath the vehicle below the exactly side doors. Allot the fastening hardware succeeding to it.
5. Applicability a creeper, if available, and lift the running board up towards the frame. You will see bolt holes in the frame that correspond to the bolt holes in the running board supports; line these up and place the bolts through the holes. It is easiest to raise one end of the running board first and support the other end on the shipping box or have a helper hold it up.
6. Install the remaining support bolts and nuts and then tighten the nuts firmly.
7. Raise the right side of the vehicle off the jack stands and lower it back to the ground.
8. Move the wheel chocks to the right side and repeat Steps 2 through 7 on the left side.
