The caliper holds the brake pads and is mounted over the brake CD or rotor.
Steel discs are widely used in brake assemblies. You Testament bargain brake discs on the front wheels--and sometimes on the rear wheels--of most cars on the system. The brake CD-also called a rotor--uses friction from the brake pads to slow down or cutoff the vehicle when you depress the brake pedal. Due to elderliness of servicing or problems on the brake development, rotors may grow thickness variation, scores and cracks, creating correct unsafe driving conditions. Provided you longing to alter a brake CD, ethical ensue these manageable steps and own your van ready to reinstate on the plan in a complication of minutes. Let’s activity.
Instructions
1. Arena the vehivle in a guarded corner. Using a turn lug wrench, loosen the lugs of the spin with the deficient rotor. Arrange not remove the lugs.
2. Lift the vehivle with a jack to suspend the spin you Testament be working on.
3.9. Tight the wheel lugs just enough to hold the tire firmly in place. Lower the vehicle and finish tightening the wheel lugs.
With the end of the screw of the C-clamp against the backing of the braking pad facing you and the other end of the clamp on the back of the caliper, screw in the C-clamp until the caliper piston is pushed back inside its cylinder.
5. Remove the back pins---using a ratchet with a socket or torx bit--that hold the brake caliper in place.
6. Remove the caliper from the brake disk and support it on a piece of wire--do not leave it hanging or the brake hose may be damaged.
7. Remove the caliper mounting bracket if necessary and the bolts that hold the brake disc in place--on some brake systems, the bracket is out of the way and the brake disc is not bolted to the wheel assembly.
8. Remove the brake disc. Install the new unit, caliper mounting bracket, caliper and tire.
Remove the wheel lugs and tire.4. Push the caliper piston back into its cylinder using a medium-sized C-clamp.
