To remove the door panel from your machine, you'll exigency to remove the window knobs (normally called switches or handles). Most newer vehicles chalk up faculty windows and locks instead of manually operated windows, on the contrary the window switch panel must be removed before accessing door components. In this tutorial, you'll get down remove effectiveness window switches too as notebook window knobs (or handles).
Instructions
Power Window Switch Panels
1. Expansive the vehicle's hood, and loosen the follower environing the balky battery cable. Pull the cable away from the terminal for safety.
2. Practice a collection of protective tape (duct tape or masking tape) to the borderline of a flat-head screwdriver. Embrace the screwdriver between the switch panel and the door panel to pry a reduce of it up.
3. Appropriateness your hands to pull remainder of the panel off. The panels are attached by clips; once you own the headmost reduce off, remainder Testament come off easily.
4.5. Roll the manual window all the way up. You'll need to know the precise position to replace the handle when you are finished.
Unhook the wiring harness from behind the window panel. Some panels have multiple harnesses for multiple features (power door locks, mirrors). Make sure you unhook all of them.
Manual Window Handles
6. Insert the edge of a small hand towel between the base of the handle and the door panel.
7. Pull the towel back and forth for a few moments to pry off the "U" clip. Pay attention when the clip comes off--it has a tendency to spring out.
8. Pull the handle straight away from the door panel. With the clip removed, it will slide right off.
