Brew your own exhaust pipes for an ATV and then route or reconfigure your engine accordingly. The project requires metal benders and decent constitution steel piping. You can entertain as inspired as you alike or simply diagram your pipes to be another functional. Either journey, it's a extensive project.
Instructions
1. Set the exhaust gasket on your ATV engine block. For most four-stroke engines there is a unmarried exhaust Issue on the left or fair side. It also helps to take an angle measurement using a protractor or by creating a paper template of the angle.5. Take the pipe to a metal bender and insert it into the machine with the mark facing you. Slowly heat the back and front side of the pipe with a blowtorch, then bend it with the machine to the precise angle.
The pipes Testament retain to slide into this gap, unless you design on using some Category of adapter tube between this Issue and your leading pipes.
3. Buy the correct size pipes depending on your measurements. Look for alloy pipes made of high quality steel with a wall thickness of 1/16-inch or less. Stainless steel pipes are a great bet, just be sure they are designed to be heat tolerant.
4. Dry fit the pipes to the exhaust outlet to ensure they fit correctly. Then mark the pipes where your first bend will be with a black magic marker. It Testament corner a steel gasket telephone with two bolts to attach the exhaust.2. Degree the magnitude of the exhaust Issue. Gate the width (entire span across) from the two inside walls of the Issue.
6. Repeat steps 4 and 5 for the additional bends in your exhaust pipes. When you are finished, cut the ends of the pipe using a metal saw. Your ATV pipes are complete.
